BISELAR
Cómo reiniciar
Make sure you remove the Bluetooth profile on your device first before resetting
Paso 1
Make sure your S-PLAY is charged before resetting then remove them out of the case
Paso 2
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
Paso 3
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
Paso 4
Your device has been resetted and can now be connected to your Bluetooth enabled device.
Paso 1
Make sure your S-PLAY is charged before resetting then remove them out of the case
Paso 2
Turn on your S-PLAY by holding the Power On Button for 2 seconds. They will go to pairing mode which will be indicated by the flashing white and blue LEDs.
Paso 3
Continue holding onto the S-PLAY for another 5 seconds to turn them off and hold for another 10 seconds and the LED should flash once.
Paso 4
Your device has been resetted and can now be connected to your Bluetooth enabled device.
